Ilkeston Garage can arrange for your car to have its annual MOT or this can be included as part of its annual service. We can also carry out any repair work should your car fail an MOT test.
You must keep any vehicles driven on the road in a roadworthy condition. The MOT test checks that your vehicle meets road safety and environmental standards.
It isn’t the same as having your vehicle serviced and doesn’t check its general mechanical condition.
What is included in the MOT test?
When to test
You must get an MOT test every year once your vehicle is 3 years old.
You can then renew your MOT up to a month before it expires. The earliest date you can get your vehicle tested is printed on the pass certificate.
If your MOT has expired
You can’t drive your vehicle on the road if the MOT has expired. You could be prosecuted if caught.
The only exception is if you’ve already booked an MOT and are driving your vehicle to the test centre.
The law requires that everyone who uses a vehicle on the road must keep it in a roadworthy condition at all times. Once a year, roadworthiness is checked in the interests of road safety and the environment by the test we know as the “MOT”.
The first test is required once a car is three years old. (There are different rules if you use it as a taxi or if it has more than 8 passenger seats). It should be clearly understood that the MOT is a minimum standard which your car should meet at all times; it is not a standard you should bring your car up to once a year.
The MOT looks at some important items on your car to see that they meet the key legal minimum requirements at the time of test. You should be aware that the MOT certificate is not a guarantee of the general mechanical condition of a vehicle.
Components to be inspected:
Body / vehicle structure / general items: Free from excessive corrosion or damage in specific areas. No sharp edges likely to cause injury.
Bonnet: Securely latches in the closed position.
Brakes: Condition including inappropriate repairs or modifications, operation and performance (efficiency test). Note the removal of the road wheels and trims are not part of the test. Anti-lock Braking System (ABS) and Electronic Stability Control (ESC) where fitted. Check of the dashboard Malfunction Indicator Lamp (MIL) for ABS, ESC, electronic park brake and brake fluid warning.
Doors: Latch securely in closed position. Front doors should open from inside and outside the vehicle. Rear doors should open from outside the vehicle. Hinges and catches for security and condition.
Electrical: Visible electrical wiring and battery.
Exhaust emissions: Vehicle meets the requirements for exhaust emissions, dependent on the age and fuel type of the vehicle.
Exhaust system: Secure. Complete. Catalyst missing where one was fitted as standard. Without serious leaks and is not too noisy.
Fuel System: No leaks. Security and condition of pipes / hoses. Fuel cap fastens and seals securely. Note: the fuel cap will need to be opened. Make sure the key is available.
Horn: Correct operation and of suitable type.
Lights: Condition, operation including High Intensity Discharge (HID) and Light Emitting Diode (LED) headlamps for cleaning, self levelling and security. Headlamp aim. Main beam warning light.
Load security: Boot or tailgate can be secured in the closed position.
Mirrors: Minimum number required, condition and security. Indirect vision devices.
Registration plates: Condition, security, colour, characters correctly formed and spaced.
Seat belts: All the seat belts fitted are checked for type, condition, operation and security. All mandatory seat belts must be in place. Check of the Malfunction Indicator Lamp (MIL) for air bags and seat belt pre tensioners and load limiters.
Seats: Drivers seat for adjustment. All seats for security and seat backs can be secured in the upright position.
Steering and suspension: Condition, steering oil level, operation, a check for inappropriate repairs or modification including corrosion to power steering pipes or hoses. Operation of steering lock mechanism. Check of the MIL for electronic power steering and steering lock.
Towbars for security / condition: inappropriate repairs or modification. Correct operation of 13 pin electrical socket. Speedometer condition and operation. Engine mountings.
Tyres and wheels: Condition, security, tyre size/type and tread depth. Spare wheels and tyres are not inspected. Note: vehicles first used on or after 1 January 2012 – check of the MIL for Tyre Pressure Monitoring System (TPMS).
Vehicle identification number: Present on vehicles first used on or after 1 August 1980. A single VIN is displayed except on multistage build vehicles. (e.g. van conversion, BMW/Alpina etc.)
Windscreen: Condition and driver’s view of the road.
Wipers/washers: Operate to give the driver a clear view ahead.
An MOT certificate confirms that at the time of the test, without dismantling, the vehicle met the minimum acceptable road safety and environmental standards required by law. It does not mean that the vehicle is roadworthy for the life of the certificate. The test does not cover the condition of the engine, clutch or gearbox.